: djayakrishna@nitw.ac.in : 8332969369
Research Interests: Phase Change Materials;Utilization of Solar energy;Computational Fluid Dynamics (CFD);Thermal Energy Storage;Heat transfer in porous media;Thermal management of batteries/electronic components
Positions Held
Name of the Organisation |
Position/ Pay scale |
From |
To |
National Institute of Technology Warangal (NIT-Warangal) |
Professor |
18th July 2022 |
Till date |
National Institute of Technology Warangal (NIT-Warangal) |
Associate Professor |
27th March 2018 |
17th July 2022 |
National Institute of Technology Warangal (NIT-Warangal) |
Assistant Professor |
19th December, 2013 |
26th March 2018 |
BITS Pilani Hyderabad campus |
Assistant Professor |
5th May, 2010 |
16th December, 2013 |
Texas A&M University (TAMUQ) |
Postdoctoral Research Associate |
7th February, 2009 |
4th May, 2010 |
General Motors Technical Center, Bangalore, INDIA |
Lead CFD Engineer |
7th July,2008 |
15th December, 2008 |
Research Interests
Ph. D. dissertation:
Title : Study of Buoyancy Induced Flows in Anisotropic Porous Media Using a Generalized Non-Darcy Formulation (Awarded: 2008)
Heat Transfer and Thermal power lab (HTTP lab), Department of Mechanical Engg., IIT Madras
Guided by : Prof. Sarit Kumar Das, Professor, Mechanical Engg. Department
Prof. Tanmay Basak, Professor, Chemical Engg. Department
BTech Thesis guidance:
S.No |
Name ( Roll No.) |
Thesis title |
Status |
Year |
1 |
M. Siva Praneeth* (2008B2A4524H) |
Determination of Thermophysical Properties of Phase Change Material |
Completed |
2012-13 |
2 |
Prashant Kumar Singh (113139) |
A Novel Bi-Axial Solar Tracking System |
Completed |
2014-15 |
3 |
R.V. Sharath Kumar (113240) |
CFD Analysis of the Flow Over the Sphere and a Cricket Ball |
Completed |
2014-15 |
4 |
Mashkoor Ezdi Gyasi (113229) Navneet Singh (113234) Rajat Sharma (113142) Surya Saradhi (113212) |
Solar Powered Stirling Engine |
Completed |
2014-15 |
5 |
Manish Gautam (123130) Chinmay Deshpande (123217) Shivam Kumar Singh (123244) |
Bi-Axial Solar Tracking System |
Completed |
2015-16 |
6 |
Gaurav Peswani (123119) John Antony Misquith (123124) Kishor Kumar Sevada (123126) |
Numerical investigation of a cavity receiver in a solar central receiver system (as a co-supervisor) |
Completed |
2015-16 |
7 |
Rajat Verma (133148) Kunaal Bhagat (133236) Ankit Kumar (133208) |
Bi-axial solar tracking system |
Completed |
2016-17 |
8 |
Noble Joseph (133240) |
Self stabilizing Quadcopter for military application |
Completed |
2016-17 |
9 |
Sathvik Reddy Vemunuri (143149) |
Thermal study of melting and solidification behaviour of sodium acetate trihydrate and its derivative |
Completed |
2017-18 |
10 |
Tekale Prasad Prabhakar (143258) Shubham Thakur (143151) Sohan Lal Meena (143255) |
Design of a hybrid bi-axial solar tracking system |
Completed |
2017-18 |
11 |
Shrirang Sanjay Patki (143150) |
Vaccine cold chain equipment: Issues, analysis and multi-criteria decision making (MCDM) (as a co-supervisor) |
Completed |
2017-18 |
12 |
Akshay Matra (153134) Sahil Dhok (153152) Pramod Kurhade (153130) Banoth Venkanna (153210) |
Cooling of photovoltaic panel using phase changing material (as a co-supervisor) |
Completed |
2018-19 |
13 |
Omveer Singh (153238) Pranav Agrawal (153244) Indrajit Marothia (153224) Aditya Menon (153202) |
Design and development of peltier based refrigeration system using mechanical dynamo for storage of vaccines |
Completed |
2018-19 |
14 |
Kannareddy Kiran Reddy (153225) Dudipala Sudheer Reddy (153220) Rangoi Kiran Kumar (153148) Koduri Sree Dhanush (153228) |
Melting and solidification behaviour of sodium acetate trihydrate |
Completed |
2018-19 |
15 |
Meda Partha Saradhi Varma (163139) Aakash Sankaranarayanan (163102) Punna Manideep (163149) Dharamsoth Tejesh (163123) |
Design and development of a vaccine storage box using peltier modules |
Completed |
2019-20 |
16 |
Radhika Bhandari (173144) Nitin Bhatia (173235) Vickneswaran Niroshan (173267) Comfort Kayombo (163270) |
Thermal management of a photovoltaic panel |
Completed |
2020-21 |
17 |
K. Abhishek (173124) P. Vinay kumar (173137) Shangar (173154) Nikith (173243) |
Analysis of indirect solar cooker with heat storage tank |
Completed |
2020-21 |
18 |
Katakam Vishnu Sree Shanthanu (183135) |
Hybrid Refrigerated portable medical carrier for Indian Rurality |
Completed |
2021-22 |
19 |
G.Ankith Kumar (183225) B.Anup Rao (183211) M.Rohith (183240) K.Vikram Yadav (183232) |
Thermal management of Electronics using PCM based heat sink |
Completed |
2021-22 |
20 |
Soyab Ansari (193274) Pavan Kumar Bala (193208) Vamshi Kishore Rasamalla (193165) Dinesh Pendem (193159) |
Thermal Management of Electronic Devices Using Heat Sink Embedded with PCM
|
Completed |
2022-23 |
*At BITS Pilani Hyderabad Campus
MTech Thesis guidance
S.No |
Name |
Reg. No./ Roll No. |
Thesis title |
Status |
Year |
External Guide |
1 |
Teja Dasari*
|
2011H148044H (Thermal Engg.) |
CFD Studies of flow over a Smooth Sphere and a Cricket Ball
|
Completed |
2012-13 |
--- |
2 |
Ghazanfar Khan*
|
2011H148041H (Thermal Engg.) |
Heatlines Visualization in Complex Geometries |
Completed |
2012-13 |
--- |
3 |
Anil Kumar Vishwakarma |
133604 (Thermal Engg.) |
Design of Thermal Protection System for a Composite Rocket Motor Casing |
Completed |
2014-15 |
Mr. Pandu Karantoth, Scientist D, Directorate Of Solid Propulsion, Defence Research And Development Laboratory, Hyderabad |
4 |
Gaurav Singhal
|
133704 (Automobile Engg.) |
Structural Modeling and Optimization of Starter Front Bracket |
Completed |
2014-15 |
Dr. Thangavelu Chinnamutha (Valeo India Private Limited) |
5 |
Vikas Kumar
|
133621 (Thermal Engg.) |
Investigation of Corrosion of Metals with PCMs for a 30–80°c Solar Heat Storage Applications |
Completed |
2014-15 |
--- |
6 |
Manish Kumar |
143607 (Thermal Engg.) |
Analytical and Numerical Study to Assess the Solar Flux on a Heliostat based Central Receiver |
Completed |
2015-16 |
--- |
7 |
Vinod Sangode |
143616 (Thermal Engg.) |
Numerical investigation of Melting performance of PCMs suitable for low temperature heat storage application |
Completed |
2015-16 |
--- |
8 |
Praneet Kuber |
143713 (Automobile Engg.) |
Numerical investigation of aerodynamics of a new and used cricket ball |
Completed |
2015-16 |
--- |
9 |
Boda Ramesh |
153604 (Thermal Engg.) |
Experimental Investigation of Melting Behaviour of Organic Phase Change Materials in Cylindrical Capsule |
Completed |
2016-17 |
-- |
10 |
Ranjan Prasad Diwakar |
153612 (Thermal Engg.) |
Optimization of Phase Change Materials Based Longitudinal Fin Heat sink |
Completed |
2016-17 |
-- |
11 |
Anand Kumar Singh |
163602 (Thermal Engg.) |
Investigation of Thermophysical Properties of Latent Heat Storage Materials Suitable for Solar Water Heating Application |
Completed |
2017-18 |
-- |
12 |
Jyoti Tomar |
163610 (Thermal Engg.) |
Numerical investigation of PCM based shell and tube heat exchanger |
Completed |
2017-18 |
-- |
13 |
Anoob C.A. |
163603 (Thermal Engg.) |
Taguchi-Grey relational analysis and MOORA method for the determination of optimal process parameter for a heat sink with phase change material |
Completed |
2017-18 |
-- |
14 |
Sahil Kumar |
173614 (Thermal Engg.) |
Numerical analysis of transient natural convection in a vaccine carrier box using thermo-electric module and phase change material |
Completed |
2018-19 |
-- |
15 |
Hussain Mahamed Javed Tapadar
|
173609 (Thermal Engg.)
|
Off Design Secondary Flow analysis of a twin shaft gas Turbine |
Completed |
2018-19 |
Mr. Rahul Wagh, Engineering Manager, OG TPS BHGE (Bangalore) |
16 |
Uday Kumar Battula |
183615 (Thermal Engg.)
|
Numerical Investigation of Melting Behaviour of Phase Change Materials dispersed with nanoparticles in a concentric pipe |
Completed |
2019-20 |
-- |
17 |
Rajdeep Gopal Jagdale |
183603 (Thermal Engg.)
|
Numerical Investigation of Flow Behavior and Wall Shear Stress in Rotating Cage Autoclave (RCA)
|
Completed |
2019-20 |
Mr. S. Kathiravan, Senior Engineer, Baker Hughes General Electric (BHGE) |
18 |
Nayan Kumar |
193614 (Thermal Engg.)
|
Thermal Management of electronic component under Pulse Heating |
Completed |
2020-21 |
-- |
19 |
Palle Bharath |
193615 (Thermal Engg.)
|
Thermal management of photo voltaic panels using water and phase change materials |
Completed |
2020-21 |
-- |
20 |
Supriyo Dey |
193620 (Thermal Engg.)
|
Analysis of melting and solidification of NEPCM inside longitudinal finned shell and tube heat exchanger |
Completed |
2020-21 |
-- |
21 |
Bharath Sai Yeluguri |
193625(Thermal Engg.)
|
Melting Analysis of Nano Enhanced PCM in Porous Media and Effect Of Orientation |
Completed |
2020-21 |
-- |
22 |
T. Kranti Kumar |
203519 (Thermal Engg.) |
Estimation of Thermophysical Properties & Thermal Reliability of Phase Change Materials |
Completed |
2021-22 |
-- |
23 |
Sahit Chavan |
203514 (Thermal Engg.) |
Compatibility studies of Aluminum and chromium coated Aluminum with organic and inorganic PCMs |
Completed |
2021-22 |
-- |
24 |
Niranjan Pathak |
203508 (Thermal Engg.) |
Thermal Management of electronic component using PCM heat sink under Pulse Heating |
Completed |
2021-22 |
-- |
25 |
B. Gnananjali
|
21MEM5S21 (Automobile Engg.) |
Comparative Analysis on a Single Track Vehicle Model for Yaw Stability Control using State Space and PID (Proportional Integral Differential) controllers through Brake Torque Actuation |
Completed |
2022-23 |
Mr.Lokendra Pavan Kumar Pappala, ZF ITC, Hyderabad |
26 |
Tahreem Hussain |
21MEM1S27 (Thermal Engg.) |
A Novel Design for Thermal Management of Pouch Type Battery Pack |
Completed |
2022-23 |
-- |
27 |
Pankaj Shankarrao Bhoyar |
21MEM1R13 (Thermal Engg.) |
Flow Analysis of Radial Inlet of Centrifugal Compressor Using Computational Fluid Dynamics |
Completed |
2022-23 |
Dr. Giridhar Kumar Dhinne, Head of Engineering-TCP & GT, Siemens Energy Industrial Turbomachinery India, Pune |
28 |
Harnish Patel |
21MEM1R15 (Thermal Engg.) |
A Comparative Analysis of Heat Pump And Liquid PTC Heater System in Electric Car at Lower Ambient Conditions |
Completed |
2022-23 |
Mr. Sarath Vaidyan, Advanced Engineering, Tata Passenger Electric Mobility, Pune, India |
*At BITS Pilani Hyderabad Campus
Memberships in Professional Bodies
Course Taught Previously |
Courses Handled - NIT Warangal (January 2014- till date)
U.G. |
P.G. |
|
|
Handled at BITS Pilani Hyderabad Campus (May 2010 - December 2013)
U.G. |
P.G. |
|
|
Publications |
Books/Chapters Authored: 3
S.No |
Title |
Author’s Name |
Publisher |
Year of Publication |
1 |
Visualization of Thermal Transport in Complex Geometries with Discrete Heat Sources at Bottom and Left Walls
|
Narasimha Suri Tinnaluri and Jaya Krishna Devanuri |
AAP – CRC Press: Taylor & Francis group |
2018 |
2 |
Numerical Investigation of Mixed Convection in a Lid-Driven Square Cavity With and Without Fin |
Ashish Saxena, Ng Yin Kwee Eddie, Jaya Krishna Devanuri, Jalaiah Nandanavanam, and Parameshwaran Rajagopalan |
AAP – CRC Press: Taylor & Francis group |
2018 |
3 |
Containers for Thermal Energy Storage |
Salunkhe Pramod B, Jaya Krishna Devanuri |
Micro-and Nano-containers for Smart Applications, 289-307, Springer, Singapore. https://doi.org/10.1007/978-981-16-8146-2_13 |
2022 |
Patents: Granted: 3
1. Title : A Novel Bi-Axial Solar Tracker Using One Motor-4124/CHE/2015
Country: India
Inventors: Prasanth Kumar Singh; Devanuri Jaya Krishna
Status: Granted (Grant No. 352847)
2. Title : A Modified Refrigeration System for Biomedical Storage- 2021105617
Country: Australia
Inventors: Katakam Vishnu Sree Shanthanu; Devanuri Jaya Krishna
Status: Granted
3. Title : A Solar Powered Cooling Chamber for Storing Farm Produce- 2021105620
Country: Australia
Inventors: Sushyanth Sridhar; Devanuri Jaya Krishna; Patri Sreehari Rao
Status: Granted
2009
2010
2011
2013
2015
2016
2017
2018
2019
2020
2021
2022
2023
S.No |
Authors |
Title |
Name of the Conference |
Year and Place |
1 |
D. Jaya Krishna, Tanmay Basak, Sarit K. Das |
Study of Non-Orthogonal Lid Driven Porous Cavity Flows by Generalized Non-Darcy Approach: |
International conferences on Recent Advances in Heat Transfer |
21st - 22nd September,2006, KITS, Coimbatore, India |
2 |
D. Jaya Krishna, Tanmay Basak, Sarit K. Das |
Influence of Inertial Effects on the Flow Inside a Lid Driven Porous Cavity: |
33rd National & 3rd International Conference on Fluid Mechanics and Fluid Power |
7th -9th December, 2006, IIT Bombay, India |
3 |
D. Jaya Krishna, Tanmay Basak, Sarit K. Das |
Buoyancy Induced Flows in a Heat Generating Anisotropic Non-Darcy Porous Medium- Use of ACFD Approach: |
44th Annual Technical Meeting, Society of Engineering Science (SES Conference) |
21st –24th October, 2007, Texas A&M University Campus, College Station, Texas, USA |
4 |
D. Jaya Krishna, Tanmay Basak, Sarit K. Das |
Anisotropy Effects on Heat and Fluid Flow for Natural Convection with a Heat Source in Fluid Saturated Porous Media: |
44th Annual Technical Meeting, Society of Engineering Science (SES Conference) |
21st –24th October, 2007, Texas A&M University Campus, College Station, Texas, USA |
5 |
K. Venkat Raman, D. Jaya Krishna, S. Sundar |
Numerical Simulation of Free Convection in an Isotropic Porous Medium: Use of ACFD Approach: |
19th National & 8th ISHMT-ASME Heat and Mass Transfer Conference |
3rd – 5th January, 2008, JNTU College of Engineering, Hyderabad, India |
6 |
Nesrin Ozalp, Vidyasagar Shilapuram, D. Jaya Krishna |
Modeling of Vortex-flow Solar Reactor Via Ideal Reactors in Series Approach: ES2010-90324: |
Proceedings of the ASME 4th International Conference on Energy Sustainability, ES2010 |
May 17-22, 2010, Phoenix, Arizona-USA |
7 |
Nesrin Ozalp, D. Jaya Krishna |
Numerical Study on the Thermal Interaction of Gas-Particle Transport for a Vortex Flow Solar reactor: ES2010-90325: |
Proceedings of the ASME 4th International Conference on Energy Sustainability, ES2010 |
May 17-22, 2010, Phoenix, Arizona-USA |
8 |
Nesrin Ozalp, Anthony Toyama, D. Jaya Krishna, Reza Rowshan, Yasser Al-Hamidi |
Effect of Camera like Aperture in Quest for Maintaining Quasi-Constant Radiation Inside a Solar Reactor: ES2010-90327: |
Proceedings of the ASME 4th International Conference on Energy Sustainability, ES2010 |
May 17-22, 2010, Phoenix, Arizona-USA |
9 |
Abdalla Abdalla, N.Ozalp, O. Bouhali, J.K. Devanuri, Ali Sheharyar |
Three Dimensional Visualization of Hydrogen and Carbon Production in a Vortex flow Solar Reactor: |
Second Annual Undergraduate Research Conference on Applied Computing-URC2010 competition |
May 5 - 6, 2010, Zayed University, Dubai, UAE |
10 |
R. Sanjay Kumar, D. Jaya Krishna, Pramod B Salunkhe |
Investigation of Heat Storage Materials for a Temperature range of 500C to 1000C: |
International conference on engineering, technology and management (ICETM Sep’12) |
7-8, Sept-2012, Tirupathi, India |
11 |
R. Sanjay Kumar, D. Jaya Krishna |
Selection of Latent heat storage materials for a temperature range of 500C to 1000C for solar water heating applications: |
International Conference on Mechanical & Industrial Engineering, ISBN: 978-93-82208-27-3 |
7th Oct 2012, Hyderabad, India |
12 |
D. Jaya Krishna, Ruturaj R Deshpande |
Taguchi based optimization to generate correlation via numerical analysis for natural convection in a differential heated cavity: |
ASME –ISHMT Conference |
28th -31st, Dec., 2013, IIT Kharagpur, India |
13 |
Narasimha Suri T, Jaya Krishna D |
A Collocated Grid Based Finite Volume Approach for the Visualization of Heat Transport in 2D Complex Geometries: |
International Conference on Computational Heat and Mass Transfer (ICCHMT-2015) |
30th Nov -2nd Dec.,2015, National Institute of Technology Warangal, India |
14 |
D. Jaya Krishna, Sharabh Kochar |
The Metallographic Study of Corrosion of Metals with Latent Heat Storage Materials Suitable for Solar Hot Water System: |
International Conference on Ceramic and advanced materials for Energy and environment (CAMEE-2015) |
14th – 17th Dec., 2015, Christ University, Bengaluru, India |
15 |
D. Jaya Krishna, Aditya Shide |
Step by Step Methodology for the Assessment of Metal Corrosion Rate with PCMs Suitable for Low Temperature Heat Storage Applications : 2-IC-1865. |
International conference on recent Trends in Engineering and material Sciences (ICEMS-2016), |
Jaipur National University, Jaipur, Rajasthan, India, 17th- 19th March, 2016 |
16 |
Manish Kumar, D. Jaya Krishna, |
Analytical and Numerical Study to Assess the Solar Flux on a Heliostat based Central Receiver-MODD-027 |
International Conference on Energy efficient Technologies for sustainability (ICEETS-16) |
St.Xaviers catholic College of Engineering, Nagercoil, Tamil Nadu, India, 7th - 8th April, 2016 |
17 |
Narasimha Suri Tinnaluri, D. Jaya Krishna |
Visualization of Energy Transport in 2-D Complex Solid Geometries-MODD-033 |
International Conference on Energy efficient Technologies for sustainability (ICEETS-16) |
St.Xaviers catholic College of Engineering, Nagercoil, Tamil Nadu, India, 7th - 8th April, 2016. |
18 |
Narasimha Suri Tinnaluri, D. Jaya Krishna |
Visualization of Thermal Transport in discretely Heated 2-D Complex Solid Geometries |
Sixth International Congress on Computational Mechanics and Simulation (ICCMS2016) Proceedings |
Indian Institute of Technology Bombay (IITB), Mumbai, India, 27thJune - 1st July, 2016, pp. 605-608 |
19 |
Thota Markandeyulu, Jaya Krishna Devanuri, K. Kiran Kumar, |
On the Suitability of Phase Change Material (PCM) for Thermal Management of Electronic Components (Paper ID-208) |
2nd International Conference on Aerospace Electronics, Electrical, Communications & Instrumentation (ASECI 2016) |
V.R. Siddhartha Engineering College, Vijayawada, A.P., India, 22nd -23rd October, 2016. |
20 |
|
Influence of Mushy Zone Constant on Thermohydraulics of a PCM (Paper ID-53), |
International Conference on Recent Advancement in Air-conditioning and Refrigeration: RAAR 2016 |
C. V. Raman College of Engineering, Bhubaneswar, Odisha, India, 10th - 12th November, 2016 |
21 |
Narasimha Suri Tinnaluri, D. Jaya Krishna
|
Heatline Approach for Visualization of Heat Transport in 2D Complex Geometries with Discrete Heat Sources (Paper ID-220), |
6thInternational and 43rd National Conference on Fluid Mechanics and Fluid Power (FMFP 2016). |
MNNITA, Allahabad, U.P., India. December 15-17, 2016 |
22 |
Praneet R Kuber, D. Jaya Krishna |
Numerical Investigation of Aerodynamics of a New Cricket Ball (Paper ID-228) |
6th International and 43rd National Conference on Fluid Mechanics and Fluid Power (FMFP 2016) |
MNNITA, Allahabad, U.P., India, December 15-17, 2016 |
23 |
Narasimha Suri Tinnaluri, D. Jaya Krishna
|
Visualization of Thermal Transport in Complex Geometries with Discrete Heat Sources at Bottom and Left Walls (ISME-TE-012) |
1st International and 18th ISME Conference |
NIT Warangal, Warangal, India, February 23 – 25, 2017 |
24 |
Ashish Saxena, Ng Yin Kwe Eddie, Jaya Krishna Devanuri, Jalaiah Nandanavanam, Parameshwaran Rajagopalan |
Numerical Investigation of Mixed Convection in a Lid Driven Square Cavity With and Without Fin (ISME-TE-218) |
1st International and 18th ISME Conference |
NIT Warangal, Warangal, India, February 23 – 25, 2017 |
25 |
S. Nagendra Babu, D. Jaya Krishna, D.R. Yadav, G. Amba Prasad Rao |
Selection of High Temperature Heat Storage Materials for Cored brick Heaters of Hypersonic Wind Tunnel/Scramjet Testing Facilities |
International Conference on Emerging trends in Materials and Manufacturing Engineering (IMME17) |
Department of Metallurgical and Materials Engineering, NIT Tiruchirapalli, Tamil Nadu, India, March 10-12, 2017 |
26 |
Narasimha Suri Tinnaluri, D. Jaya Krishna
|
Visualization of Thermal Transport in 2-D Complex Solid Geometries with Discretely Heated Bottom Wall (CJ7015) |
International Conference on Advanced Technology Innovation 2017 (ICATI2017) |
Samui, Thailand, June 25-28, 2017 |
27 |
Ranjan Prasad Diwakar, D. Jaya Krishna
|
Parametric Investigation of Thermohydraulics for a PCM based Heat Sink (IHMTC2017-15-1314) |
24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017) |
BITS Pilani, Hyderabad, India, December 27-30, 2017 |
28 |
Banoth Srinu, Jaya Krishna Devanuri |
Methodology for Selecting Thermoelectric Module for Portable Vaccine Cold Box |
International Conference on Advancements and Futuristic Trends in Mechanical and Materials Engineering |
Punjab University SSG Regional Centre (PUSSGRC), Hoshiarpur, Punjab, India, November15-17, 2018 |
29 |
Brundaban Patro, K. Kiran Kumar, D. Jaya Krishna |
Computational Studies of Air-Glass Particle Flows for the prediction of Heat Transfer and Pressure Drop |
2nd International Conference on New Frontiers in Chemical, Energy and Environmental Engineering (INCEEE-2019) |
National Institute of Technology, Warangal, Telangana, India, 15-16 February, 2019 |
30 |
G. Uma Maheswara rao and D.Jaya Krishna |
Corrosion rate of container materials with organic phase change materials used for solar heat storage applications |
International Conference on Advances in Minerals, Metals, Materials, Manufacturing and Modelling (ICAM5-2019) |
National Institute of Technology, Warangal, Telangana, India, 25-27 September, 2019 |
31 |
Narasimha Suri Tinnaluri, M. R. Ch. Sastry, D. Jaya Krishna |
Heat Transport Visualization in 2-D Domains via Isotherms and Heat lines |
Second International Conference on Technological Convergence in Engineering, Energy and Sustainability (ICTCEES-2020) |
Department of Mechanical engineering, Vimal Jyothi Engineering college, Kerala, India, 18- 19, July 2020 |
32 |
Radhika Bhandari, Jaya Krishna Devanuri |
Effect of duct geometry on thermal management of PCM – Liquid hybrid PV panel |
International Symposium on Fluids and Thermal Engineering (FLUTE - 2021) |
Department of Mechanical Engineering, Amity School of Engineering & Technology, 22nd July 2021 |
33 |
Sandip Khobragade, Jaya Krishna Devanuri |
Impact of flow direction and mass flow rate on the melting process for simultaneous charging and discharging based latent heat storage system |
Proceedings of the 26thNational and 4th International ISHMT-ASTFE Heat and Mass Transfer Conference |
IIT Madras, Chennai-600036, Tamil Nadu, India, December 17-20, 2021. |
34 |
Sree Vishnu Shanthanu Katakam, Jaya Krishna Devanuri |
Selection of Peltier for Medical Storage - A Step by Step Methodology |
Proceedings of Virtual International Conference on Research Contributions in Mechanical Engineering (ICRCME-2022) |
Seshadri Rao Gudlavalleru Engineering College (SRGEC), Gudlavalleru, Andhra Pradesh, India, 25-26 February 2022. |
S.No |
Authors |
Title of the paper |
Name of the Conference |
Year and Place |
1 |
D. Jaya Krishna and T. Venkatajalapathy |
Thermal Energy Audit in Rubber industry- a case study: |
Regional seminar on energy resources, applications, Strategies and options, School of Energy, Environment and Natural Resources |
27th Feb., 2004, Madurai Kamaraj University, India |
2 |
D. Teja, R. Sudarshan and D. Jaya Krishna |
Investigation of various turbulence models for flow over a smooth sphere: |
ICE 2013 |
15th – 16th Nov., 2013, BITS Pilani Hyderabad campus, India |
3 |
Sharabh kochar and D. Jaya Krishna |
Study of corrosion rate for metals with Palmitic acid and Myristic acid: |
ICE 2013 |
15th – 16th Nov., 2013, BITS Pilani Hyderabad campus, India |
4 |
Narasimha Suri Tinnaluri and D.Jaya Krishna
|
A Novel Algorithm for Bejans Heatline Visualization in Complex Geometries |
National symposium of Mechanical Engineering Research Scholars (NSMERS 2016), |
National Institute of Technology (NIT)-Warangal, 7th Oct 2016. |
5 |
G. Uma Maheswara rao and D.Jaya Krishna |
Visualization of Melting Behavior of palmitic acid Inside a Spherical Container |
National symposium of Mechanical Engineering Research Scholars (NSMERS 2016), |
National Institute of Technology (NIT)-Warangal, 7th Oct 2016. |
6 |
Brundaban Patro, K.Kiran Kumar and D.Jaya Krishna |
Prediction of Heat Transfer Characteristics in Dilute Gas-Solid Flows |
National symposium of Mechanical Engineering Research Scholars (NSMERS 2016), |
National Institute of Technology (NIT)-Warangal, 7th Oct 2016. |
7 |
Thota Markandeyulu, Jaya Krishna Devanuri, K. Kiran Kumar |
Effect of Boundary Condition and Fin Volumes on Thermal Performance of A Heat Sink
|
A two-day National Conference on Dynamics of interfaces in Multiphase systems |
National Institute of Technology (NIT)-Warangal, 15-16 December 2018 |
8 |
Brundaban Patro, K. Kiran Kumar, D. Jaya Krishna |
Computational modeling of gas-to-solid heat transfer in an adiabatic, vertical pipe |
National Conference on Computational Modeling of Fluid Dynamics Problems |
National Institute of Technology (NIT)-Warangal, 18th -20th Jan. 2019 |
9 |
Narasimha Suri Tinnaluri, Jaya Krishna Devanuri |
Influence of Shear Driven Velocity and Porous Matrix Orientation on Flow Behavior |
National Conference on Emerging Trends in Mechanical Engineering (ETME-2019) |
National Institute of Technology (NIT)-Warangal, 9-10 January 2019 |
PHDs Supervised |
S.No |
Name |
Reg. No. |
Thesis title / Area of Research |
Status |
Guide/ Co-Guide |
1. |
T. Narasimha Suri |
714130 |
Heatline Visualization of Thermal Transport in Anisotropic Porous Media using a Generalized Non – Darcy Formulation |
PhD awarded in 2019 |
-- |
2. |
G. Uma Maheswararao |
714021 |
Selection of a potential organic PCM for low temperature heat storage applications |
PhD awarded in 2020 |
-- |
3. |
Lokesh Kalapala |
717122 |
Experimental and numerical investigations of design parameters for a shell and tube latent heat storage unit |
PhD awarded in 2021 |
-- |
4. |
Brundaban Patro |
716122 |
Heat Transfer and Pressure Drop Studies of Gas-Solid Flow in Adiabatic Pipes using a Variable Gas Property Two-Fluid Model |
PhD awarded in 2021 |
Dr. K. Kiran Kumar (Guide) Dr. D. Jaya Krishna (Co-Guide) |
5. |
Sandip Khobragade |
718021 |
Experimental and numerical investigations of shell and tube latent heat storage system under simultaneous charging and discharging process |
Completed. Defended thesis on March 10, 2023 |
-- |
6. |
A. Gopi Krishna |
701929 |
Numerical investigation of hybrid heat transfer enhancement techniques for a shell and tube latent heat storage unit |
On-going |
-- |
7. |
Jagadeeswara Reddy.E (Part time) |
712069 |
Thermal Management of Battery |
On-going |
-- |
8. |
Amit Kumar Panihrahy (Part time) |
22MER1P04 |
Aerodynamics |
On-going |
Dr. D. Jaya Krishna (Guide) Dr.Prashanth Kumar Lam (Co-Guide) |
Workshops/Conferences |
Conferences/STTP/Seminar/Workshops/Training Programmes Organized
S. No |
Conferences/STTP/ Seminar/Workshops/ Training Programmes |
Title |
Location / Funding Agency |
Period |
1 |
International Conference |
Secretary: Indo-Danish International Conference on Wind Energy: Materials, Engineering and Policies (WEMEP2012) |
BITS Pilani Hyderabad campus / Department of Wind Energy, Technical University of Denmark, Denmark |
Nov. 22- 23, 2012 |
2 |
National Conference |
Convener: Emerging Trends in Mechanical Engineering - ETME2019 |
NIT Warangal / TEQIP-III |
January 9 – 10, 2019 |
3 |
Faculty Development Programme (FDP) |
Coordinator: Advances in Computational Fluid Dynamics: Methods and Applications using MATLAB and ANSYS-Fluent |
E & ICT Academy, National Institute of Technology Warangal / Ministry of Electronics and Information Technology (MeitY), GOI |
May 6 – 11, 2019 |
4 |
Workshop |
Co-coordinator: Two day Workshop on Phase Change Materials for Thermal Energy Storage |
Jointly Organized by Department of Mechanical Engineering V R Siddhartha Engineering College Vijayawada, AP & Department of Mechanical Engineering National Institute of Technology, Warangal Warangal, TS |
December 8th -9th, 2022 |
Invited/Expert Lectures Delivered
S. No |
Topic |
Program title |
Institute |
Workshop Period |
|
1 |
Production of Hydrogen from Hydrocarbons using Solar Energy |
International Conference on Wind Energy: Materials, Engineering and Policies (WEMEP2012) |
BITS Pilani Hyderabad Campus, India |
November 22- 23, 2012 |
|
2 |
Solar hydrogen production: |
National Workshop on Advances in Sustainable Energy Studies (ASES-2014) |
NIT Warangal, India |
November 1 – 2, 2014 |
|
3 |
Untraditional formulations for the insight of thermal transport
|
Mathematical Modeling and Advanced Numerical Techniqes |
NIT Warangal, India |
December 2- 7, 2016. |
|
4 |
Solar Energy and its applications |
Environmental Issues and Challenges |
Telangana Academy of Sciences, NIT Warangal, India |
January 11, 2017 |
|
5 |
i. Introduction to CFD: Applications and Governing Equations ii. Buoyancy induced flows in a cavity: formulation and analysis iii. Porous media formulation for heat transport in nuclear fuel rod bundle iv. Hydrogen production using Solar energy |
Computational Methodologies in Mechanical Engineering |
Gayatri Vidya Parishad College for Degree &P.G.Courses School of Engineering, India |
March 9-11, 2017 |
|
6 |
Review of governing equations for fluid flow |
Computational Fluid Dynamics |
Gudlavalleru Engineering College, India |
June 18-23, 2018 |
|
7 |
Modeling and Simulation using CFD |
Research Methodology and Statistical Analysis |
Sagi Rama Krishnam Raju Engineering College, India |
July 09-14, 2018 |
|
8 |
Practical applications of Computational Fluid Dynamics with hands on taining using Matlab and Ansys Fluent |
Practical applications of Computational Fluid Dynamics |
Dhanekula Institute of Engineering and Technology, India |
November 23-25, 2018 |
|
9 |
i. Dimensional & Non-dimensional analysis of flow in lid driven cavity problem ii. Dimensional & Non-dimensional analysis of natural convection problem iii. Practical session: Simulation of lid driven cavity flow and natural convection in a cavity
|
ASPEN and CFD (Ansys) for Chemical Engineering Students & Scholars |
NIT Warangal, India |
June 03-14, 2019 |
|
10 |
Modeling and Simulation Using a CFD Tool
|
Computational Fluid Dynamics using Ansys Fluent (Hands on practice |
VSM College of Engineering, India |
August 01-03,2019 |
|
11 |
i. Aerodynamics in Sports ii. Solar Hydrogen Production |
Emerging Technologies and Challenges in Mechanical Engineering (ETCME) |
R.V.R. & J.C. College of Engineering, India |
21 October – 02 November, 2019 |
|
12 |
|
GIAN program (Exergy Analysis of Industrial Processes) |
NIT Warangal, India |
February 11 – 15, 2019 |
|
13 |
Characterization of PCMs and their compatibility with metals |
Advancements in phase change material based Thermal and renewable energy technologies (online FDP) |
Lakireddy Balireddy College of Engineering, India |
June 01-05,2020 |
|
14 |
Phase Change Materials: Applications, classification and selection criteria |
Research Trends in Mechanical Engineering (online FDP) |
Gudlavalleru Engineering College, India |
June 15 – 20, 2020 |
|
15 |
Energy Storage Technology |
One Week Faculty development programme on Research in Energy Technologies (online FDP) |
Bharati Vidyapeeth (Deemed to be University) College of Engineering, Pune, India |
July 06 –11, 2020 |
|
16 |
Phase Change materials and their applications |
Webinar on Phase Change materials and their applications |
SNS College of Technology, Coimbatore, India |
August 01, 2020 |
|
17 |
Non-Dimensionalization and Validation of a Hydrodynamics problem
|
One Week Expert Lectures on Emerging Research Opportunities for Mechanical Engineers
|
CMR Engineering College, Hyderabad |
August 13, 2020 |
|
18 |
Latent Heat Storage Materials – Fundamentals, Applications and Compatibility Issues |
AICTE Sponsored Six Days Virtual Short Term Training Programme (STTP) |
Sri Sai Ram Institute of Technology, Chennai |
September 17, 2020 |
|
19 |
Prediction of carbon and hydrogen in solar reactor for methane cracking process |
AICTE Sponsored One Week Online Short Term Training Programme (STTP) on Computational Fluid Flow and Heat Transfer |
Department of Chemical Engineering, Gayatri Vidya Parishad College of Engineering, Visakhapatnam, Andhra Pradesh |
September 23, 2020 |
|
20 |
Thermal energy storage for solar application |
Five Days AICTE Sponsored Online Faculty Development Program on Solar Power for Rural Development |
Department of Mechanical Engineering, JNTUA College of Engineering Kalikiri |
October 08, 2020 |
|
21 |
i. Second Law of Thermodynamics ii. Optimization of fin parameters to reduce entropy generation and melting time of a latent heat storage unit |
AICTE sponsored online one week faculty development programme on Thermodynamics & its applications |
Department of Mechanical Engineering, JNTUA College of Engineering, Ananthapuramu, & Directorate of Faculty Development & IQAC, JNTUA, Ananthapuramu, A.P. |
January 20 – 25, 2021 |
|
22 |
Basics of CFD and hands-on session on commercial CFD tool Ansys -Fluent |
FDP on Computational Fluid Dynamics |
Department of Mechanical Engg., KL University, A.P., India |
June 10 – 16, 2021 |
|
23 |
Thermal Management of Battery Storage System in E-Mobility |
Five Day Online National Atal Faculty Development Programme (FDP) on Electric Transportation Infrastructure for E-Mobility in India |
Department Of Electrical Engineering, National Institute of Technology Warangal |
August 02 – 06, 2021 |
|
24 |
Introduction to CFD, Formulation and solving problems using Ansys |
AICTE Sponsored FDP on Finite Element Method and its Applications in Engineering |
Department of Mechanical Engineering, Balaji Institute of Technology and Science, Telangana |
August 23- September 04, 2021 |
|
25 |
Solar energy as a transportation fuel |
One-Week Online Faculty Development Programme with collaboration of AICTE Training and Learning (ATAL) Academy on “RENEWABLE ENERGY FOR INDUSTRIAL & DOMESTIC APPLICATIONS” |
Jawaharlal Nehru Technological University Anantapur College of Engineering (Autonomous) Pulivendula (JNTUACEP) |
September 06-10, 2021 |
|
26 |
Electric Vehicles Battery Thermal Management Systems
|
One week online Faculty Development Programme On “RECENT TRENDS IN THERMAL ENGINEERING” |
Department of Mechanical Engineering, Gudlavalleru Engineering College, AP, India |
September 06-10, 2021 |
|
27 |
Heat Pipes for Thermal Storage and Dissipation Applications |
Two- Day Webinar on “Thermal Analysis of Heat pipe for Energy Saving Applications” Under AICTE Marga darshan Scheme |
Department of Mechanical Engineering, Velagapudi Ramakrishna Siddhartha Engineering College Vijayawada, AP
|
November 23-24, 2021 |
|
28 |
Thermal Management of Battery Storage System in E-Mobility |
Eight-Day online FDP on “Application of Power Electronics in Electric Vehicles and Energy Storage”, Electronics & ICT Academy, NIT Warangal |
Department of Electrical Engineering, NIT Warangal & Department of Electrical & Electronics Engineering NIT Karnataka, Surathkal |
February 14 -22, 2022 |
|
29 |
Thermal storage management in EV |
Ten-Day Online Faculty Development Programme (FDP) on Advanced Power Electronics, Drives & Storage Systems for E-Transportation in India |
Jointly Organized by Electronics & ICT Academy, NIT Warangal and GNITS Hyderabad (Sponsored by the Ministry of Electronics and Information Technology (MeitY), GOI) |
(25th April – 06th May, 2022) |
|
30 |
Phase Change Materials for Thermal Energy Storage |
Two day Workshop on Phase Change Materials for Thermal Energy Storage |
Jointly Organized by Department of Mechanical Engineering V R Siddhartha Engineering College Vijayawada, AP & Department of Mechanical Engineering National Institute of Technology, Warangal Warangal, TS |
December 8th -9th, 2022 |
|
31 |
Talk on solar hydrogen production, Hand on experience on CFD simulations, Hands-On-Practice with simple Case studies |
A 3-Day Faculty Development Program on “Next Generation Research in Mechanical Engineering with Hands-On Experience” |
Department of Mechanical Engineering, Shri Vishnu Engineering College for Women::Bhimavaram, AP |
5th – 7th January, 2023 |
|
32 |
Battery thermal management system for e-vehicles |
One week online Faculty Development Programme on Advancements in Mechanical Engineering - AME 2023 |
Department of Mechanical Engineering,Lakireddy Bali Reddy College of Engineering, Vijayawada, AP |
June 19th – June 24th, 2023 |
Conference Chair/Co-chair:
S. No |
Conference title |
Institute |
Period of conference |
1 |
Session Co-chair: International Conference on Wind Energy: Materials, Engineering and Policies (WEMEP2012) |
BITS Pilani Hyderabad Campus, India |
November 22- 23, 2012 |
2 |
Session Chair: International Conference on Computational Heat and Mass Transfer (ICCHMT-2015) |
NIT Warangal, India |
30 November– 2 December, 2015 |
3 |
Session Chair: International Conference on Emerging trends in Mechanical Engineering - 2018 (ICETME-2018) |
Srinivasa Ramanujam Institute of Technology, India |
December 20-22, 2018 |
4 |
Session Chair: 2nd International Conference on New Frontiers in Chemical, Energy and Environmental Engineering (INCEEE-2019) |
NIT Warangal, India |
February 15-16, 2019. |
5 |
Session Chair: First International Conference on Applied Mechanical Engineering Research 2019 (IC-AMER) |
NIT Warangal, India |
May 2-4, 2019 |
6 |
Session Chair: 2nd International Conference on Numerical Heat Transfer and Fluid Flow (NHTFF-2020) |
NIT Warangal, India |
17-19 January, 2020 |
7 |
Session Chair: First International Conference on Mechanical Engineering: Researches and Evolutionary Challenges (ICMech-REC-2023) |
NIT Warangal, India |
23-25 June, 2023 |
Workshops/Conferences attended
Projects |
Research Projects:
S. No. |
Title of the Project |
PI/ Co-PI |
Period/ (Status) |
Funding Agency |
Amount |
1. |
Visualization of carbon particle tracking and hydrogen production in a vortex flow solar reactor |
Co-PI |
5 months (2010) / Completed |
Qatar foundation and ITS Research Computing group |
4000 USD |
2. |
Investigation of Corrosion on Metals with Phase Change Materials for a 30–100 oC temperature range Solar Thermal Heat Storage Applications |
PI |
2 years (2013-2015) / Completed |
MHRD/ NITW |
6.5 lakhs (INR) |
3. |
Design and Development of an Efficient and Cost Effective Solar Water Latent Heat Storage System (SB/FTP/ETA-0130/2014) |
PI |
3 years (2015-2018) / Completed |
DST-SERB Start-Up Research Grant (Young Scientists)
|
29.81 lakhs (INR) |
4. |
Thermal Management of Continuous and Pulse Heating Based Electronic Components by Using A Heat Sink Impregnated with A Phase Change Material (DR2019004)
|
PI |
2 years (2018-2019)/ Completed
|
IEI R&D |
30,000 (INR)
|
5. |
Internal Flow Fields Analysis of Solid Rocket Motors Before and After Sudden Opening of Thrust Termination Ports |
Co-PI |
2 years (2019-2021)/ Completed
|
DRDO – ASL (Advanced Systems Laboratory)
|
9.93 lakhs (INR) |
6. |
PCM Characterization and Testing |
PI |
14 months (2022-2023) / Ongoing |
DRDO – CASDIC (Combat Aircraft System Development and Integration Center) |
16.56 lakhs (INR) |
Consultancy:
S.No. |
Title of the Project |
PI/ Co-PI |
Period/ (Status) |
Funding Agency |
Amount |
1. |
Simulations of lithium ion battery pack for effective thermal management |
PI |
14 months |
AACCENOS Solutions Pvt. Ltd., Chennai. |
6.49 lakhs (INR) |
Awards and Honors |
Additional Responsibility |
Institute level
Department level: